[混合电子管和晶体管前置放大器] Nembrini Audio NA Bass 3500 v1.0.0 Incl Keygen-R2R [WiN]（31.0MB）

Team R2R | 05 Aug 2026 | 31.0MB

安装方法：安装并注册，若要运行 .r2rwm 文件，您需要安装“TEAM.R2R.System.v1.5.1-R2R”（下载包内已提供）。

Bass 3500 放大器是一款完整的贝斯放大和录音套件，旨在提供强劲的低频、快速的瞬态响应、震撼的冲击力和灵活的音色，完美复刻了传奇混合式贝斯放大器的标志性特征。它以传奇的 Hartke HA3500 贝斯放大器为蓝本，完美捕捉了其混合式前置放大器设计的独特魅力。

用户可以独立混合电子管和晶体管前置放大器，将温暖的谐波和饱和度与晶体管电路的清晰度、解析力和即时响应相结合。

主要功能：

混合式前置放大器：可独立混合电子管和晶体管电路，兼具温暖的音色、丰富的谐波特性、清晰的音色、解析力和冲击力。
内置压缩器：控制瞬态峰值，平衡动态范围，并为贝斯信号增加厚度和一致性。LED 指示灯可提供压缩和限制的视觉反馈。
十段图示均衡器：可在 30 Hz、64 Hz、125 Hz、250 Hz、500 Hz、1 kHz、2 kHz、3 kHz、5 kHz 和 8 kHz 处提供 ±15 dB 的调节。
轮廓控制：宽广的低通和高通控制分别用于调整 100 Hz 附近的低频区域和 10 kHz 附近的高频区域。
前置放大器单块效果器：包含噪声门、包络滤波器、八度音效器和现代电子管驱动。每个单块效果器均可拖动和重新排序，以自定义信号链。
箱体和录音链：包含四种贝斯箱体模拟、四种麦克风模型、可调节的麦克风位置、高音单元控制、并行 DI 处理和三种环境音效。
双脉冲加载器：可加载和混合最多两个第三方脉冲响应，并具有独立的电平、声像、相位、独奏和静音控制。
六段参数均衡器：提供精细的放大器后音色塑造，包含多种滤波器类型，并可调节频率、增益和Q值。
放大器后效果器：包含录音室压缩器、低音优化调制器和模拟延迟器。每个效果器均可拖动以更改信号路由。
箱体旁路：旁路整个箱体、录音链和脉冲响应加载器部分，以便与外部箱体处理器、脉冲响应加载器或真正的功率放大器和低音扬声器系统配合使用。

“The unmistakable punch, definition, and flexibility of a legendary hybrid bass amplifier”

Bass 3500 Amplifier, a complete bass amplification and recording suite designed to deliver powerful low end, fast transient response, punch, and tonal flexibility. Bass 3500 is modeled after the legendary Hartke HA3500 bass amplifier, capturing the distinctive character of its hybrid preamplifier design.

Users can independently blend the Tube and Solid State preamp stages, combining harmonic warmth and saturation with the clarity, definition, and immediate response of a solid-state circuit.

Key features:

Hybrid Preamp: Independently blend the Tube and Solid State stages to combine warmth, harmonic character, clarity, definition, and punch.
Built-In Compressor: Controls transient peaks, evens out dynamics, and adds weight and consistency to the bass signal. The activity LED provides visual feedback for compression and limiting.
Ten-Band Graphic Equalizer: Provides ±15 dB of adjustment at 30 Hz, 64 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 3 kHz, 5 kHz, and 8 kHz.
Contour Controls: Broad Low Pass and High Pass controls shape the low-frequency region around 100 Hz and the upper-frequency region around 10 kHz.
Pre-Amplifier Stomp Effects: Includes a Noise Gate, Envelope Filter, Octaver, and Modern Tubes Drive. Each pedal can be dragged and reordered to customize the signal chain.
Cabinet and Recording Chain: Includes four bass cabinet emulations, four microphone models, adjustable microphone positioning, tweeter controls, parallel D.I. processing, and three ambience environments.
Dual Impulse Loader: Loads and blends up to two third-party impulse responses, with independent Level, Pan, Phase, Solo, and Mute controls.
Six-Band Parametric Equalizer: Provides detailed post-amplifier tone shaping with multiple filter types and adjustable Frequency, Gain, and Q.
Post-Amplifier Effects: Includes a Studio Compressor, bass-optimized Modulation, and Analog Delay. Each effect can be dragged to change the signal routing.
Cabinet Bypass: Bypasses the complete cabinet, recording chain, and impulse-loader section for use with external cabinet processors, IR loaders, or a real power amplifier and bass speaker system.

🏠 HomePage