[格莱美大师御用母带响度神器]Metric Halo (MHMBS) CGII v4.0.71.235 [WiN]（10.8MB）

X | 14 May 2025 | 10.8 MB

安装方法：

您无需 Ilok 即可运行；它比原版消耗更少的资源。

*重要提示*

安装：
步骤 1. 运行 CGII_v4.0.71.235.exe。
步骤 2. 保留默认路径或选择您喜欢的路径。
步骤 3. 记得支持开发者“先试后买”的理念。

尽情享受 :)

响亮无比，卓越非凡。

Sterling Sound 高级母带工程师兼合伙人 Chris Gehringer 对我们的 Sontec MES-432D9D 非常着迷，以至于当 Rick Carson 找到他，希望他能开发一款签名插件时，他已经迫不及待地想要了！我们合作的成果就是 CGII——一款母带处理动态后期处理工具包。

CGII 由两个相互补充的动态增强部分、一个全新的 True Peak Limiting 级、DC 阻断和抖动功能组成，并通过精美的电子管灯丝显示器显示 LUFS/真峰值计量，所有功能均可在高达 16 倍的过采样率下运行（或者完全不采样 – 取决于您的喜好）。

该设计优先考虑音乐的完整性和易用性，能够有效提升响度、重量和清晰度，而不会像传统动态处理器那样削弱空间深度和震撼力。

使用 CGII 可以让您的母带声音响亮，同时又不会损失原始混音的清晰度、密度和厚重感。即使您的混音已经非常响亮，您也可以稍微调整一下，既不会增加令人不快的失真，也不会让素材变得平淡，也不会削弱低频的活力。同时，您可以控制程序的真实峰值电平，以确保采样间没有过载。

我们还添加了抖动功能、直流阻断滤波器和完整的 LUFS/真实峰值电平表，以便您可以将 CGII 放置在主干链的末端，作为最终处理的一站式服务。

虽然 CGII 最初的规格是同时实现良好和响亮的效果，但您会发现它在混音和处理链中的各种位置都表现出色。

使用响度处理器来激发谐波。使用密度处理器来增强光晕并提高低电平清晰度，而不会影响瞬态。或者，只需将极其透明的真实峰值前瞻限制放置在您需要的任何地方即可。

破解者：X
> 一步安装。
> iLok 破解。
> CPU 占用低于原版。

*先试后买！如果可以的话，请支持一下开发者！
尽情享受吧！:)

Impossibly Loud. Impossibly Good.

Chris Gehringer, Senior Mastering Engineer & Partner of Sterling Sound, was so taken with our Sontec MES-432D9D that when Rick Carson approached him about doing a signature plug-in, he was was ready to go! The result of our collaboration is CGII – a mastering dynamics finishing toolkit.

CGII is comprised of two uniquely complementary dynamics enhancement sections, a new True Peak Limiting stage, DC blocking and dither with LUFS/true peak metering via spiffy tube filament displays, all operating at up to 16x over-sampling (or none at all – depending on your tastes).

The design prioritizes musical integrity and ease of use, with the ability to add effective loudness, weight and definition without diminishing spatial depth and visceral impact the way traditional dynamics processors often do.

Use CGII to make your masters loud without losing the clarity, density and heft of the original mix. Even if you are working with a mix that is already loud, you can give it a little extra, without adding unpleasant distortion and without flattening out the material and sucking the life out of the low end. At the same time you can control the true-peak level of the program to ensure that there are no inter-sample overs.

We’ve also included dither, a DC-block filter and complete LUFS/True Peak metering so that you can place CGII at the end of your master chain as a one-stop shop for final processing.

While CGII’s original spec was to make things good & loud simultaneously, you will find that it is wonderful in a variety places in your mixing and processing chain.

Use the Loudness processor to excite harmonics. Use the Density processor to bring up the bloom and raise low-level clarity without affecting transients. Or simply put the incredibly transparent true-peak lookahead limit any place you need it.

Cracked By: X
> 1 step installation.
> iLok Defeated.
> Less CPU Usage Than Original.

*Try before you buy! Support the developer if you can!
ENJOY! :)

🏠 HomePage