[混音和母带处理的行业标准削波器] Kazrog KClip 3 v3.6.5 [WiN, MacOSX, LiNUX]（40.2MB+17.3MB+27.5MB）

GTA | 11 October 2025 | 40.2 MB/17.3 MB/27.5 MB

安装方法：只需安装，尽情享受！

KClip 3
用于混音和母带处理的行业标准削波器。

母带级多频段削波触手可及。
KClip 3 包括 8 种革命性的削波模式 – 平滑、清脆、电子管、磁带、锗、硅、破损扬声器和吉他放大器 – 以及多频段 + 中侧处理。

专业级母带。最大透明响度。
KClip 3 通过以下方式增强您的音乐：
✔️ 透明的竞争响度，干净地饱和瞬态峰值，同时完全保持下面的信号不变（或根据需要进行多或少的更改​​。）

✔️ 1 个插件中包含 8 种独特强大的削波模式 – 平滑、清脆、电子管、磁带、锗、硅、破损扬声器和吉他放大器

✔️ 多频段模式 – 使用最多 4 种不同的削波模式，分为 4 个可自定义的带宽区域

✔️ 中/侧模式 – 调整进入削波器的中侧比例，实现强大的立体声成像控制

您的混音和母带 = 几分钟内即可发布。
您还将获得：
✔️ 母带级过采样高达 32 倍，并在支持的主机中设置在线和离线渲染模式

✔️ 颜色编码的可视化工具实时显示剪辑量

✔️ EBU 计量 (LUFS) – 将目标响度优化到您想要的水平，并快速确保您的混音或母带已准备好流式传输

✔️ 可调整大小的窗口 – 增强的可视化工具和计量可扩展以适合您喜欢的窗口大小

✔️ 适用于多台设备的 100% 永久许可证，无需 iLok 授权，无需恐龙加密狗疯狂，并且永远零订阅费

版本 3.6.5 – 2025 年 10 月 2 日
新功能
扩展了 LUFS 响度目标范围

增强功能
完全支持 Linux
参数自动化已更新至当前行业标准
实现 AAX 自动化突出显示
主机旁路功能已更新至当前行业标准
SDK 和框架已更新

错误修复
可视化器：波形渲染的准确性得到了提高，尤其是在播放重复样本时。

KClip 3
The industry standard clipper for mixing and mastering.

Mastering-grade multiband clipping at your fingertips.
KClip 3 includes 8 revolutionary clipping modes – smooth, crisp, tube, tape, germanium, silicon, broken speaker, and guitar amp – as well as multiband + mid-side processing.

Pro-level masters. Maximum transparent loudness.
KClip 3 supercharges your music with:
✔️ Transparent competitive loudness, cleanly saturating transient peaks while leaving the signal underneath completely unchanged (or changed as much or as little as desired.)

✔️ 8 uniquely powerful clipping modes in 1 plugin – Smooth, Crisp, Tube, Tape, Germanium, Silicon, Broken Speaker, and Guitar Amp

✔️ Multiband mode – use up to 4 different clipping modes split between 4 customizable bandwidth regions

✔️ Mid/Side mode – adjust the proportion of mid and side going into the clipper for powerful stereo imaging control

Your mixes and masters = release ready in minutes.
You’ll also get:
✔️ Mastering-grade oversampling up to 32x, with online and offline render mode settings in supported hosts

✔️ Color-coded visualizer shows clipping amount in real-time

✔️ EBU metering (LUFS) – target loudness optimization to your desired level and quickly make sure your mix or master is ready for streaming

✔️ Resizable window – enhanced visualizer and metering expand to fit your preferred window size

✔️ 100% perpetual license for multiple devices, no iLok authorization required, no dinosaur dongle insanity required, and ZERO subscription fees EVER

Version 3.6.5 – October 2, 2025
New Features
Expanded LUFS Loudness Target range

Enhancements
Linux fully supported
Parameter automation updated to current industry standards
AAX automation highlighting implemented
Host bypass functionality updated to current industry standards
SDKs and frameworks updated

Bug Fixes
Visualiser: Accuracy of waveform rendering has been improved, particularly when repeated samples are played back.

🏠 HomePage