[模拟缓冲插件] SoundRave BufferCareler v1.0.0 VST3 AU [WiN, MacOSX]（26.4MB)

FREE | June 2026 | 26.4 MB

安装方法：直接安装，免激活版本。

模拟缓冲插件。这是一款免费的踏板缓冲和线缆接口插件，能够模拟直接录音或使用无线系统时经常丢失的细微电信号交互。您可以探索不同的输入负载、有源器件特性、输出阻抗和线缆长度，从而将线缆带来的音色和感觉重新带入无线或盒内信号链中。

主要功能：
–完整的缓冲信号路径— 模拟输入负载、输入缓冲、耦合电容、有源器件音色、保护级非线性、带宽、输出阻抗和线缆电容
–八种缓冲音色— 提供八种通用电路配置，从带有音色的踏板式缓冲到高阻抗、变压器耦合和干净的录音室式响应
–九种有源器件特性— 比较晶体管、场效应晶体管、变压器和六种运算放大器式响应
–无源/有源输入— 更改源阻抗和负载特性，以适应无源乐器或有源线路电平设备
–无线设置线缆模拟— 可以选择无线缆或 1 米、3 米、5 米和 10 米的线缆长度。这使无线用户能够恢复通常由物理线缆引入的细微负载和高频变化
– 微调（Trim）— 将输入到模拟电路的电平从 -24 dB 调整到 +24 dB
–增益（Gain）— 将模拟输出级从 -12 dB 调整到 +18 dB
– 固定 4 倍过采样— 高质量过采样保持非线性级平滑
–带参数平滑的立体声处理。

无线系统越来越普遍，但移除乐器线缆也移除了其与信号的部分电相互作用。BufferCareler 让您在保持无线设置的便捷性和自由度的同时，重新添加线缆带来的音色。它可以位于链路的前端，以重现物理设置的负载和高频相互作用，也可以位于链路的末端，以探索输出阻抗和线缆长度如何影响馈送到下一个设备的信号。

Analog Buffer Plugin. A free pedal-buffer and cable interface that models the small electrical interactions often lost when recording directly or using a wireless system. Explore different input loads, active-device characters, output impedances, and cable lengths to bring cable-induced tone and feel back into a wireless or in-the-box signal chain.

Key Features
– Complete Buffer Signal Path — Models input loading, input buffering, coupling capacitance, active-device colour, protection-stage nonlinearity, bandwidth, output impedance, and cable capacitance
– Eight Buffer Voicings — Choose from eight generalized circuit profiles ranging from coloured pedal-style buffers to high-impedance, transformer-coupled, and clean studio-style responses
– Nine Active-Device Characters — Compare transistor, field-effect transistor, transformer, and six op-amp-style responses
– Passive / Active Input — Changes source impedance and loading behavior to suit passive instruments or active and line-level equipment
– Cable Simulation for Wireless Setups — Select no cable or 1, 3, 5, and 10 meter cable lengths. This lets wireless users restore the subtle loading and high-frequency change normally introduced by a physical cable
– Trim — Adjust the level entering the modeled circuit from -24 to +24 dB
– Gain — Set the modeled output stage from -12 to +18 dB
– Fixed 4x Oversampling — High-quality oversampling keeps nonlinear stages smooth
– Stereo processing with parameter smoothing

Wireless systems are increasingly common, but removing the instrument cable also removes part of its electrical interaction with the signal. BufferCareler lets you add that cable-induced tone back while keeping the convenience and freedom of a wireless setup.

It can sit at the start of a chain to recreate the loading and high-frequency interaction of a physical setup, or at the end to explore how output impedance and cable length affect the signal feeding the next device.

🏠 HomePage