[音量塑形器和频谱闪避插件] Sonic Academy SideKick v1.0.3-HCiSO [MacOSX]

Team HCiSO | 05 October 2026 | 35.72 MB

安装方法：直接安装，免激活版本。

SideKick 将可绘制音量包络、智能频谱闪避和侧链环形调制功能整合到一个插件中。

让你的底鼓和贝斯完美配合。利用底鼓实现精准的音量闪避，通过频谱塑形来控制相互冲突的频率，或者探索侧链环形调制。绘制包络线来控制它对每个打击的响应。

精准的包络控制。
无需费力调整压缩器设置，即可塑造您想要的精确声音。添加节点、弯曲曲线或自由绘制。

• 添加节点、直线或曲线以及自由绘制
• 将节点捕捉到网格
• 沿 X 轴和 Y 轴反转节点
• 旋转包络线
• 应用平滑处理以消除咔嗒声
• 应用摆动效果

智能频谱闪避。
你的底鼓需要空间，但这并不意味着你的整个贝斯线都要消失。SideKick 分析侧链频谱，并在 24 个内部频段上构建反向 EQ 曲线，仅降低相互干扰的频率。

与传统的频谱侧链不同，SideKick 的包络控制着频谱闪避随时间推移的程度。您可以保持动态柔和透明，也可以在需要更强动态效果时突出形状。

独立的频谱起音和释放控制可让您微调响应，而包络可以控制频谱深度或在频谱阶段之后进行传统的音量闪避。

• 24段反向均衡器跟随侧链频谱
• 使用包络线随时间塑造频谱深度
• 可调节透明分离度或更明显的抽吸效果

多频段处理。
将信号拆分，并为低频、中频和高频分别赋予独立的包络和强度。
仅对低频进行衰减，同时保持高次谐波自由流动。需要时，可将各个频段的包络链接起来，使它们同步变化。

• 20 Hz–20 kHz，2 个可调分频点
• 零延迟、最小相位 Linkwitz-Riley 分频器
• 可选线性相位分频器
• 12 或 24 dB/倍频程斜率和独立频段独奏
• 可与频谱和侧链环形调制模式结合使用

→ 五种不同的模式。全部集成在一个插件中。
可与 DAW 同步，通过 MIDI 或音频触发，或使用我们的频谱闪避和侧链环形调制功能。

✓速度和走带控制。与 DAW 保持同步。
包络线跟随 DAW 的速度和走带控制。设置循环长度，添加摇摆感，并构建精准的动态效果。

✓音符已触发。播放触发音。
通过 MIDI 音符触发 SideKick。最大程度灵活地控制包络触发。

✓瞬态触发。使用侧链输入。
利用阈值、滞后和保持控制，通过输入的侧链信号检测触发点。对触发信号进行滤波，以隔离需要响应的频率。

✓ 24段分析。只消除干扰项。
分析整个频谱的侧链，并减少与源信号匹配的部分。在保留声音特性的同时，在关键之处腾出空间。

✓环形调制。对源信号进行环形调制。
它利用侧链信号通过信号倍增来调制源信号。与频谱模式选择性地衰减频率不同，环形调制会在底鼓存在时快速改变源信号的频谱成分。

侧链环形调制。
环形调制会将你的音源与侧链信号相乘，在底鼓存在时快速改变其频谱内容。与频谱模式不同，它不会选择性地降低竞争频率，而是创造新的频率。

这种速度可以让你的底鼓和贝斯同时演奏，而不会像传统侧链那样出现明显的音量波动或下降。两种声音听起来像是紧密地融合在一起，而 SideKick 则有助于控制它们重叠时引起的峰值电平提升。

使用起音和释放设置来平滑色彩和消除瑕疵。

• 对重叠的底鼓和贝斯响应速度极快
• 无需传统泵感即可控制峰值累积
• 通过调整起音和释放时间来平衡速度与流畅度

快速切换控制。
快速切换功能让您只需一步即可重新定位下潜动作的关键部分。滑动控制杆，即可将下潜和恢复动作精确地放置在节奏所需的位置，而无需逐个节点地重建包络线。

编辑快速切换范围并选择要分组的节点。这样，当需要微调时序时，您的自定义选择就会一起移动。

将音频转换成你自己的包络线。
录制输入的侧链信号。SideKick 会将其轮廓捕捉为一个可编辑的形状，你可以对其进行调整、保存和重复使用。

→ 更多功能：

差值监测。
差值监测可让您试听输入和输出之间的差异。

中侧处理。
从中心到边缘，平衡中侧和边缘的处理。

波形显示。
主波形和外部波形叠加显示信号之间的相互作用。

预设和收藏夹。
浏览 100 多个预设，并将您喜欢的预设保存到附近。

网格、捕捉和摆动。
选择 1/2 到 1/64 之间的网格，将节点捕捉到位并添加摆动。

撤销和重做。
在编辑过程中，您可以随时向前或向后退，而不会中断您的工作流程。

单次触发或循环触发。
您可以触发包络一次，也可以循环触发以实现连续运动。

侧链触发滤波器。
设置频率和带宽，然后试听滤波后的信号，以分离出触发信号。

线性相位分频器。
多频段压缩器中可选的线性相位分频器。

扩展视图模式。
隐藏侧边栏，以扩展视图显示信封。

发布说明：
## v1.0.3

### 错误修复
– 修复了移除插件时可能发生的崩溃问题。
– 修复了插​​件在外部显示器上的大小限制问题。
– 修复了“新闻”公告在插件中显示两次的问题。

支持的操作系统：
• macOS 10.13 或更高版本
• Apple Silicon 或 Intel Core 处理器

SideKick brings drawable volume envelopes, intelligent spectral ducking and sidechain ring modulation together in one plugin.

Get your kick and bass working together. Use your kick to drive precise volume ducking, target competing frequencies with spectral shaping, or explore sidechain ring modulation. Draw the envelope to shape how it reacts around each hit.

Precision envelope control.
Shape the exact sound you want to hear instead of fighting compressor settings. Add a node, bend a curve or draw freely.

• Add nodes, straight or curved lines and freehand drawing
• Snap nodes to grid
• Invert nodes by X and Y axes
• Rotate the envelope
• Apply smoothing to eliminate clicks
• Apply swing

Intelligent spectral ducking.
Your kick needs space, but that doesn’t mean your whole bass line needs to disappear. SideKick analyses the sidechain spectrum and builds a reversed EQ curve across 24 internal bands, reducing only the frequencies that compete.

Unlike conventional spectral sidechaining, SideKick’s envelope controls how much spectral ducking is applied over time. Keep the movement soft and transparent, or accentuate the shape when you want more pump.

Independent spectral attack and release controls let you fine-tune the response, while the envelope can control either spectral depth or traditional volume ducking after the spectral stage.

• 24-band inverse EQ follows the sidechain spectrum
• Shape spectral depth over time with the envelope
• Dial in transparent separation or a more pronounced pump

Multiband processing.
Split the signal and give your low, mid and high bands their own envelope and intensity.
Duck only the sub frequencies while keeping your upper harmonics flowing freely. Link the envelopes when you want them to move as one.

• 20 Hz–20 kHz, 2 adjustable crossovers
• Zero-latency, minimum-phase Linkwitz–Riley crossover
• Optional Linear phase crossover
• 12 or 24 dB/octave slopes and individual band solo
• Can be combined with Spectral and Sidechain Ring Mod modes

→ Five different modes. All in one plugin.
Sync to DAW, trigger from MIDI or Audio, or make use of our Spectral Ducking and Sidechain Ring Modulation.

✓ Tempo & transport. Stay locked to the DAW.
The envelope follows your DAW’s tempo and transport. Set the cycle length, add swing and build movement that lands exactly where you need it.

✓ Note triggered. Play your trigger.
Trigger SideKick from the MIDI notes. Maximum flexibility over triggering the envelope.

✓ Transient triggered. Use a sidechain input.
Detect trigger points using the incoming sidechain signal using threshold, hysteresis and hold controls. Filter the trigger signal to isolate a frequency to react to.

✓ 24-band analysis. Duck only what competes.
Analyse the sidechain across the spectrum and reduce the matching areas of your source. Keep the character of the sound while opening space where it matters.

✓ Ring Modulation. Ring Modulate your source signal.
Uses the sidechain signal to modulate the source through signal multiplication. Rather than selectively attenuating frequencies like Spectral mode, this rapidly changes the source’s spectral content while the kick is present.

Sidechain Ring Modulation.
Ring Mod multiplies your source by the sidechain signal, rapidly changing its spectral content while the kick is present. Unlike Spectral mode, it doesn’t selectively turn down competing frequencies—it creates new ones.

That speed can let your kick and bass play together without the obvious pump or volume dip of conventional sidechaining. The two sounds feel squeezed together while SideKick helps control the peak-level increase caused by their overlap.

Use the attack and release settings to smooth out colour and artifacts.

• Extremely fast response for overlapping kick and bass
• Control peak build-up without conventional pumping
• Use attack and release to balance speed against smoothness

Quick shift control.
Quick Shift lets you reposition the critical part of your duck in one move. Slide the bar to place the dip and recovery exactly where the groove needs them, without rebuilding the envelope node by node.

Edit the Quick Shift range and select the nodes you want grouped. Your custom selection then moves together whenever the timing needs a nudge.

Turn audio into your own envelope.
Record the incoming sidechain signal. SideKick captures its contour as an editable shape you can refine, save and reuse.

→ More Features:

Delta Monitoring.
Delta monitoring lets you audition the difference between input and output.

Mid/Side Processing.
Balance processing between Mid and Side, from the centre to the edges.

Waveform Display.
Main and external waveform overlays show how your signals interact.

Presets & Favourites.
Browse 100+ presets and keep your favourites close.

Grid, Snap & Swing.
Choose a grid from 1/2 to 1/64, snap nodes into place and add swing.

Undo & Redo.
Step backwards or forwards through edits without losing your flow.

One-shot or Loop.
Trigger the envelope once or loop it for continuous movement.

Sidechain Trigger Filter.
Set the frequency and bandwidth, then audition the filtered signal to isolate your trigger.

Linear Phase Crossover.
Optional linear phase crossovers in the multiband compressor.

Expanded View Mode.
Hides the sidebar to give an expanded view of the envelope.

Release Notes:
## v1.0.3

### Bug fix
– Fixed a potential crash when removing the plugin.
– Fixed plugin size constrain on external displays.
– Fixed “news” announcements appearing twice in the plugin.

Supported Operation System:
• macOS 10.13 or later
• Apple Silicon or Intel Core processor

🏠 HomePage