[影视独特恐怖紧张木管乐器音源] Fallout Music Group Unblown v1.1.0 [KONTAKT]

它提供了一个 16 步音序器，每个步进都可以加载来自 5 个类别（超过 700 个不同的采样）的声音样本：机械音效（例如咔嗒声等）、空灵音效、音调音效、咆哮音效和颤音。每个步进都可以进行音量、声像、长度和音调调整，从而带来无限的可能性，并可直接与 DAW 中的各种拍号同步。

– 数千种独特的音序组合，生成简单便捷
– 16步音序器，可控制当前激活的步数
– 预置音序菜单，包含众多自定义音序，助您快速上手
– 独特的自然音源
– 乐器级随机化选项，允许您对所有16个音源进行随机化，涵盖所有声音类别，或限定为特定声音组合
– 键盘映射：一个键用于自动播放音序，另外16个键用于手动演奏自定义音序，并加载16个采样步进
– 步进音源选择、随机化、音量、静音和声像控制
– 步进音高偏移，最大可达+3/-3个八度（以半音为单位调整）
– 全局效果器，包括失真、延迟（可选时间同步）和混响（可选反向选项，营造诡异效果）
– 所有音源均以24位/48kHz录制

为您提供 72 种独具匠心的嗖嗖声效果，全部由现场木管乐器演奏和 700 多个不同的单次采样音源组合而成，并运用我们全新的四层引擎生成，可生成各种打击音效和惊吓音效。您可以单独播放打击音效，也可以播放任何预设的嗖嗖声，这些嗖嗖声会在嗖嗖声结束后自动播放打击音效。您可以创造出从轻柔到极致恐怖的各种打击音效组合。

我们全新的四层引擎新增了一个特殊的打击乐层，您可以从 30 种不同的打击乐音效中选择一种作为您创作打击音效的基础，并将其与三层木管乐器音源混合，为您带来真正独特的音效。

– 我们的四层引擎可提供成千上万种独特的组合，让您为作品创作真正独一无二的打击乐和音效。
– 每层均可控制起音和释放时间。
– 每层均可控制高通/低通滤波器。
– 每层均可进行音高偏移，最多可偏移 +2/-2 个八度（以半音为单位）。
– 每层均可选择和随机化音源。
– 每层均可控制独奏、静音、音量和声像。
– 嗖嗖声层可进行音量、高通/低通滤波器和 +2/-2 个八度（以半音为单位）的音高偏移。
– 乐器级随机化器可随机化所有四层的音源，为您带来灵感和创作自由。
– 键盘映射功能：在 C3 上演奏预设的打击乐，并在 C0 到 C6 的所有其他琴键上演奏每个嗖嗖声后紧接着的预设打击乐。
– 全局效果器，包括饱和度、失真、延迟（可选时间同步）和混响。
– 所有音源均以 24 位/48kHz 高品质录制。

Unblown Risers 将我们的三层引擎提升到了一个全新的、扭曲的高度，它融合了各种现场木管乐器和经过处理/加工的上升音效，所有音效均以 8 小节、120bpm 的速度录制，并可根据您的项目速度进行伸缩。每一层都是由经过精心处理的木管乐器或合成器音色打造而成，所有音色都经过大量处理，旨在与您疯狂的创作交织在一起。

– 我们的三层引擎可提供数千种独特的组合，让您为恐怖和紧张的音乐作品创作真正独一无二的渐强音效
– 每层独立的起音和释放控制
– 每层独立的高通/低通滤波器控制
– 每层独立的音高偏移控制，可实现高达 +2/-2 个八度的音程偏移（以半音为单位调整）
– 每层独立的音源选择和随机化控制
– 每层独立的独奏、静音、音量和声像控制
– 乐器级随机化器，可对所有三层音源进行随机化，为您带来即刻的灵感和创作自由
– 键盘映射，可在 C3 上演奏预设的渐强音效，音高可跨越八度延伸至 C4
– 全局效果器，包括饱和度、失真、延迟（可选时间同步）和混响
– 所有音源均以 24 位/48kHz 高品质录制

在 Samples 文件夹中，您会找到一个名为“24bit 48k Wavs”的文件夹。如果您喜欢使用 wav 文件，这里将为您提供极大的自由度。不过，我们建议您使用图形用户界面 (GUI) 来随机生成并创建您的基本初始声音。之后，您可以轻松地对其进行编辑并导出为音频文件以进行进一步处理。在此文件夹中，您会找到 3 个子文件夹，其中包含以下 wav 文件：

-设计声音：此文件夹包含 70 多个声音（打击乐、渐强音、节奏和嗖嗖声），全部由 Unblown 创建，并经过进一步处理，使其适用于预告片。-

预设导出：此文件夹包含 GUI 中每个渐强音和打击乐预设的 wav 文件导出文件。如果您想快速开始对喜欢的预设进行额外处理，只需下载这些文件即可。- 原始声音：在此文件夹中，您可以找到乐器中使用的各个采样，包括单独的渐强音、打击乐和嗖

嗖声源。

注意：安装完成后，您会在乐器安装目录下的 Samples 文件夹中找到一个名为“24bit 48k Wavs”的文件夹，其中包含所有这些文件。

Provides you with a 16 step sequencer where each step can be loaded with a different sample from one of 5 categories (and over 700 distinct samples) of sounds: Mechanics (clicks and such), Airy, Tonal, Growls & Bites, and Flams. Each step can have volume, panning, length and tuning adjustments, making for infinite possibilities, and direct syncing to various time signatures in your DAW.

– Thousands of unique pattern combinations and patterns readily available and simple to generate
– 16 step sequencer with control to change the active number of steps
– Prebuilt pattern menu with many custom patterns ready to give you a jump start
– Unique organic sources
– Randomization options at the instrument level, allowing you to randomize all 16 sources with all categories of sounds or limited to certain combinations of sounds
– Keyboard mapped to use one key to play the pattern automatically and another 16 keys to allow you to play your own pattern manually with the 16 loaded sample steps
– Per-step source selection, randomize, volume, mute and panning controls
– Per-step pitch shifting to allow up to +3/-3 octaves(adjusted in semi-tones)
– Global FX, including distortion, delay (temp-sync optional), and a reverb with optional reverse option for some truly creepy effects
– All sources recorded at 24bit, 48k quality

Provides you with 72 unique, designed whoosh effects, all made from live woodwind manipulations and over 700 different one shot samples combined in our new 4-layer engine to generate hits and jump scares. Play the hit by itself or play any of the whooshes which are programmed to play the hit automatically at the end of the whoosh. Create endless combinations of hits from subtle to absolutely horrific.

Our new 4-layer engine adds a special Percussion layer, which lets you select one of 30 different percussive hits as a base for your hit creations, mixing with the 3 layers of woodwind sources to give you something truly special.

– Thousands and thousands of unique combinations available via our 4-layer engine, allowing you to create truly unique hits and sounds for your compositions
– Per-layer attack and release controls
– Per-layer high / low pass filter controls
– Per-layer pitch shifting to allow up to +2/-2 octaves(adjusted in semi-tones)
– Per-layer source selection and randomization
– Per-layer solo, mute, volume and panning controls
– Volume, high / low pass filter and pitch shifting +2/-2 octaves (adjusted in semi-tones) for the whoosh layer
– Instrument level randomizer to randomize sources for all 4 layers, giving you instant inspiration and creative freedom
– Keyboard mapped to play the engineered hit on C3 and each whoosh followed by the engineered hit on all other keys from C0 to C6
– Global FX, including saturation, distortion, delay (temp-sync optional), and reverb
– All sources recorded at 24bit, 48k quality

Unblown Risers takes our 3-layer engine to new, twisted heights, with various live woodwind and manipulated/processed risers, all recorded at 8 bars, 120bpm and set to stretch to your project tempo. Each layer is a hand-crafted riser made from tortured woodwinds or synths, all heavily manipulated and designed to be weaved together into your own maniacal creations.

– Thousands of unique combinations available via our 3-layer engine, allowing you to create truly unique risers for your horror and tension compositions
– Per-layer attack and release controls
– Per-layer high / low pass filter controls
– Per-layer pitch shifting to allow up to +2/-2 octaves(adjusted in semi-tones)
– Per-layer source selection and randomization
– Per-layer solo, mute, volume and panning controls
– Instrument level randomizer to randomize sources for all 3 layers, giving you instant inspiration and creative freedom
– Keyboard mapped to play the engineered riser on C3 and pitch stretched across the octave up to C4
– Global FX, including saturation, distortion, delay (temp-sync optional), and reverb
– All sources recorded at 24bit, 48k quality

Included in the Samples folder you will find a folder named ’24bit 48k Wavs’. If you prefer working with wav files, you will find an amazing amount of freedom here. That said, we suggest using the GUIs to randomize and create your basic starter sound. Then it is easy to manipulate and export to audio for further processing. Within this folder you will find 3 sub-folders with the following wav files:

– Designed Sounds: This folder contains over 70 sounds (hits, risers, rhythms and whoosh hits) all created by Unblown and then taken through more processing to be trailer-ready.

– Preset Exports: This folder contains a wav file export of each of the Riser and Hit presets found in the GUIs. If you want a quick start to adding additional processing to a preset you like, just grab these and jump in.

– Raw Sounds: In this folder you will find the individual samples used in the instruments, including the individual riser, percussion and whoosh sources.

– NOTE: After install, you will find a folder named 24bit 48k Wavs with all of these files. This folder will be in the Samples folder wherever you installed the instrument.